Delta manufactured dozens of accessories to extend the performance and versatility of the 12″ wood lathe.
The Delta wood lathe accessories below were those listed for the 1948 version of the 12″ wood lathe.
No. 933. Drive Center for 12″ Lathe. Fits any lathe headstock with No. 2 Morse Taper Hole. Has replaceable center pin and four accurately milled teeth.
No. 934. Cup Center for 12″ Lathe. Fits any tailstock with No. 2 Morse Taper Hole. Has replaceable center pin. hardened and polished.
No. 939. 60 degree plain center for metal turning. With No. 2 Morse Taper Shank for 12″ Lathe. Hardened and ground.
Screw-on arbor with 1/2″ shaft for grinding wheels, buffing wheels, wire brushes, etc. Flanges trued for accuracy. For 1″ diameter by 8 thread shaft.
No. 144. Screw-on Arbor Right Hand Thread
No. 145. Screw-on Arbor Left Hand Thread
No. 968. Geared chuck with key. No. 2 Morse Taper shank for 12″ Lathe. Invaluable for drilling on the lathe. Capacity No. 60 1/2″.
No. 1461. Tool Rest Base for 12″ Lathe. Has V-shaped hole for 1/2″ to 1″ diameter shanks, with universal locking mechanism.
No. 697. Heavy, right Floor Stand for face plate work on the left of the spindle. Tripos legs, pipe support, V-Hole for 1/2″ to 1″ shank. Knocked down.
No. 692. Standard Tool Support. Is 12″ wide with 1″ diameter shank. Heavy and strong. Designed for minimum interference with tools and handles.
No. 694. 24″ Double Post Tool Support. Is 24″ wide with 1″ diameter shanks. Heavy and strong. Designed for minimum interference with tools and handles.
No. 690. 4″ Tool Support. Has a 1″ diameter shank. Very strong and well made. Made for use where doing small, fine work.
No. 695. Right angle Tool Support for 12″ Lathe. Has 1″ diameter shank. Strong and heavy. Extremely useful for face plate work.
No. 1468. Steady Rest for 12″ Lathes. Prevents spring and vibration of long stock. Heavy cast iron base with sliding arms of steel. Capacity 12 1/4″ diameter.
No. 938. 5″ Hand Wheel for 12″ Lathe. Fits left-hand threaded end of lathe spindle. Useful for quick stopping of lathe, for positioning of work. etc.
No. 936. 3″ Face Plate for small and medium face plate work on the 12″ lathe. Faced true and provided with three holes for screws. R.H. thread only. For shaft with 1″ – 8 thread.
No. 937. 6″ Face Plate for large face plate work on teh 12″ Lathe. Has special thread to fit both right and left-hand threaded spindles. Used either end of spindle. For shaft with 1″ by 8 thread.
No. 935. Adapter for 12″ Lathes. Has No. 2 Morse Taper Shank on one end, other end 1/2″ diameter, 1 1/8″ long. Enables use of all attachments with 1/2″ bore to be used.
No. 4005. Buffing Wheel, for polishing plated parts and cleaning and buffing metal parts of all kinds. Consists of 2 sections, 6″ diameter, with 1/2″ hole to fit arbor.
Wire wheels for scrubbing rust from metals, removing burrs, etc. Two sections, 6″ diameter 1/2″ hole.
No. 3113 – Wire, Coarse
No. 3114 – Wire, fine
No. 3115 – Tampico Fibers
6″ diameter, high-quality, fast cutting emery wheel. 1/2″ wide with 1/2″ hole to fit arbor. Handy to have in any shop.
No. 3101 – Emery wheel, 50 grit.
No. 3102 – Emery wheel, 60 grit.
Delta Wood Lathe Accessories – Lathe Tools
Made of special, high-grade alloy steel. Fitted with extra long hard wood handles, 1 ’14 “x 1 0 1/2 “. Overall length 15”. 1 114 Ibs.
No. 121………. 1″ Skew Chisel
No. 122………. 3/4″ Gouge
No. 123………. 1/4″ Gouge
No. 124………. 1/2″ Skew Chisel
No. 125………. 1/4″ Parting Tool
No. 126………. 1/2″ Gouge
No. 127………. 1/2″ Spear Chisel
No. 128………. 1/2″ Round Nose
No. 130………. Set of above 8 tools
